Bearing Strips FR 10

The Principal

FR 10 Elastomeric Bearing Strip is a linear membrane produced with the aim of supporting structures from lateral loads. This high quality reinforced elastomeric membrane will resist displacement, loads and rotation.
The purpose of the design is to produce an enduring linear membrane for use in the construction industry wherever there is the need. Being in the highways or buildings such as high or low rise structure under the beam.
FR 10 strip can be used where there is the need to control movements and some rotation, allowing tensile forces and horizontal movements to be absorbed. This will improve structural quality and ability to withstand lateral movements.
The membrane is to carry the lateral forces allowing:

 

• Building to escape damage such as cracks.

• Highways to withstanding horizontal movements.

Such compositions may be utilized on substrates which are subject to vibration and deflection, and are capable of recovering from deformation resulting from an elongation or change of temperatures. This product is suitable as a crack suppression membranes and floor leveling.

Design Features

The basic composition of the FR 10 strip are produced from Natural Rubber and layers of woven fabric plus other additives forming a tough and versatile module that can be used in the construction of building and civil engineering projects.

This membrane can be produced with FIBER GLASS allowing greater transition of up to 25mm.

Width

FR10 is manufactured in 1 M length with typical width of 100mm or 150mm. The width can be altered to suit the customer¡¦s requirement.
Thickness
Thickness of the membrane can varies between 5 to 40mm depending on the loads and displacements the membrane is subjected to.
The typical thickness of this membrane is 10mm and can be designed to suit the customer¡¦s requirements.

Benefits

• Designed to accept movements

• Flexible & durable

• Strength

• Crack Suppression

• Economical

• Easy to use system

• The membrane can be used in high and low temperature.

• Can be designed for 100% humidity and temperature of up to 60 centigrade environments.

Installation of the membrane

I. Building structure:
The membrane is positioned under the beam being concrete or steel.
Concrete beam: place inside the bottom shutter where the load is being applied.
Steel beam: there should be a gap of 1mm between the membranes with the steel beam.
II. Highways:
In the case of highways the membrane placed between the elements of the structure such as deck and a wing, etc.
Specifications
AssaFlex RF10 is manufactured to ASTM D/2240, 412, 395 specifications with Ozone resistance on ASTM.D/1171 allowing the membrane to be able to stand elements when used externally such as bridge, etc.
AssaFlex FR10 can be manufactured to any standards requested by the customer.

 

Specification for FR10

 

 

 

FSM-Strip

A MEMBRANE TO USE IN PLACE OF GROUT FOR A VERIETY OF CONDITIONS
IN THE CONSTRUCTION OF BUILDINGS


Design Features

A hardwearing and durable Reinforced Rubber membrane formed from elastomer, fabric and other additives.  It is a versatile rubber system with unique flexibility properties that is designed to absorb the movements.

The purpose of the design after years of experience on rubber product is to produce a membrane to replace grout with two fundamental purposes:

Removal of the wet trade.
Increase speed of the installation.

FSM- Strip is flexible enough to fill the concrete contour with other qualities where use of grout is required.

Application

Holding Down bolts
Machine bedding and base plates
Stanchions
Cavity filling
Etc

FSM-strip replaces the grout

By using FSM- strip, the client saves money and time, allowing one team to carry out the installation in one cycle, therefore increasing productivity.


Life Expectancy

AssaFlex FSM- Strip has very high life expectancy where grout shelf life would not exceed over 3 years.

FSM- strip is manufactured in 10mm, 20mm & 50mm thicknesses.

Production

The membrane can be manufacture according to the customers need, either in strip or in square.  Where there are certain numbers of holes required, we can form the holes on receiving the relevant sketch

Benefits

Designed to accept  movements
Flexible & durable
Where there is a need for Immediate high strength
High tensile with vibration resistance
Moisture resistance
Can be used in freezing temperature
Speed up the installation process by removing the wet trade hence saving time
Economical
Easy to use system

 

 

 

 

Bearing Strips

 

 

FR 10 Elastomeric Bearing Strip is a linear membrane produced with the aim of supporting structures from lateral loads.  This high quality reinforced elastomeric membrane will resist displacement, loads and rotation.

The purpose of the design is to produce an enduring linear membrane for use in the construction industry wherever there is the need, being in the highways or buildings such as high or low rise structure.

FR 10 strip can be used where there is the need to control movements, allowing tensile forces and horizontal movements to be absorbed. This will improve structural quality and ability to withstand lateral movements.

 

The membrane is to carry the lateral forces allowing:

 

Building to escape damage such as cracks.

Highways to withstanding horizontal movements.

Such compositions may be utilized on substrates which are subject to vibration and deflection, and are capable of recovering from deformation resulting from an elongation, change of temperatures.   This product is suitable as a crack suppression membranes and floor leveling.

 

Design Features

 

The basic composition of the FR 10 strip are elastomer and layers of woven fabric forming a tough and versatile module that can be used in the construction of building and civil engineering projects.

FR10 is manufactured in 1 M length with width of 100mm or 150mm

 

Thickness

 

Thickness of the membrane can varies between 5 – 25mm depending on the loads and displacements the membrane is subjected to.

The typical thickness of this membrane is 10mm and can be designed to suit the customer’s requirements.

 

 

Benefits

 

Designed
Flexible & durable
Strength
Crack Suppression
Economical
Easy to use system
The membrane can be used in any temperature.

 

Fixing of the membrane

Building structure:
The membrane is positioned under the beam being concrete or steel.
Concrete beam: place inside the bottom shutter where the load is being applied.
Steel beam: there should be a gap of 1mm between the membranes with the steel beam.

Highways:
In the case of highways the membrane placed between the elements of the structure.

Specifications

 

AssaFlex RF10 is manufactured to ASTM D/2240, 412, 395 specifications with Ozone resistance on ASTM.D/1171 allowing the membrane to be able to stand elements when used externally such as bridge, etc.

AssaFlex FR10 can be manufactured to any standards requested by the customer.